Send Email
Send SMS
Search
Simplex Metal & Alloys
Simplex Metal & Alloys

Home » Products »


Spring Steel Products

Our product range includes a wide range of c60 spring steel, c55 spring steel, c62 spring steel, c70 spring steel, c75 spring steel and c80 spring steel.

C60 Spring Steel

REQUEST CALLBACK

C60 Spring Steel
Approx. Rs 80 / Kilogram(s)
Get Best Quote

C60 steel plate is one mainly of high carbon steel,EN 10083 C60 steel plate is one of the higher carbon content (0.60%) steels.It is more difficult to fabricate than the lower carbon grades.

Simplex Metal & Alloys is a huge exporter of Spring Steel C60 Sheets in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

 

C60
EN 10083-2
Number:1.0601

Comparision of steel grades

JIS G 4051S 58 C
DIN 17200C 60
NFA 33-101-
UNI 7846-
BS 970070 M 60
UNE 36011-
SAE J 403-AISI1060

C60 steel Chemical Composition

GradeC(%)min-maxSi(%)min-maxMn(%)min-maxP(%)maxS(%)maxCr(%)min-max
C600.57-0.650.15-0.350.60-0.900.0250.0250.20-0.40

C60 steel Mechanical Properties

GradeConditionYield Strength
R°(Mpa)
Tensile Strength
Rm
(Mpa)
Elon-
gation
A5(%)
Hardness
HRC
Quenching
Temperature
(℃)
Benda-
bility
Nominal Thickness,t
1.95mm≤t≤10.0mm
RolledAnnealed
C60Rolled
Annealed
Water-quenched
Oil quenched
540
370
875
580
2670
2430
17
29
63
60
800
840
Min.reco-mmended
Bending radius
(≤90°)
3.0
×t
1.0×t

Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C55 Spring Steel

    REQUEST CALLBACK

    C55 Spring Steel
    Approx. Rs 80 / Kilogram(s)
    Get Best Quote

    C55 steel Tempered spring steel sheets is a high carbon cold-rolled steel sheet having both excellent stretch-flage formability and excellent homogeneity of hardness in the sheet thickness direction is provided by a manufacturing method having the transformation point.
    Simplex Metal & Alloys is a huge exporter of Carbon Steel C55 Sheets in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabiaand the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

    StandardAISI, BS, DIN
    Steel GradeCK67, Cs60,Cs70
    SpecificationThickness range1.0-1.8mm±1μm
    Width range30-70mm±5μm
    TechniqueCold rolled
    Surface TreadmentNature(Grayblue), Blue Polished
    MOQ5 tons for trial
    Coil Weight250-500kg
    Hardness43-48HRC
    Standard of surfaceNo flaw, burr, rust.
    Packing1 Each coil is closely covered by plastic film.
    2 Outer is compound paper packing.
    3 Delivered in iron pallets.
    EdgeMill, slit , round
    Yield Strees(Strength)370-1175 N/mm2
    Tensile Strength540-1275 N/mm2
    ApplicationGrayblue Hardened and tempered rolling shutter spring;
    Hardened and tempered high carbon rolling door steel spring.
    Blue Polished shutter door spring,
    Rolling shutter spring steel strip.
    RemarkHardness, surface, and package so on,
    which could be customized.

    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C62 Spring Steel

    REQUEST CALLBACK

    C62 Spring Steel
    Approx. Rs 80 / Kilogram(s)
    Get Best Quote

    During hardening and tempering the strip surface gets oxidized, developing a Blue-grey finish. But in many application the strips are required in Bright finish. This is obtained by grinding the surfaces with waterproof-coated abrasive belts in a grinding machine with coolant flow.

    Simplex Metal & Alloys is a huge exporter of C62 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

    Chemical composition & Sizes

    SpecificationGrade%C%Mn% P (max.)% S(max)% Si (max)Size range
    Medium & High CarbonC550.50-0.600.60-0.900.0350.0250.35Width: 6.0-325mm

    Thickness: 0.40-3.00mm

    C620.60-0.670.60-0.900.0350.0250.35
    C800.75-0.850.60-0.900.0350.0250.35
    • Low Alloy steels against specific enquiry
    • Non-standard sizes against specific enquiry

    Special features:

    • Minimum decarburisation
    • Uniform Hardness and Texture
    • High degree of toughness
    • Excellent Spring Properties
    • Precision blanking ability
    • Minimum edge camber
    • Flatness across width
    • No curling

    Supply Condition:

    Hardened and Tempered

    Surface: Furnace Blue-Grey or Bright Ground Finish
    Edges: Available in rounded edges
    Tolerance: On Width & Thickness as per BIS/International Standards.

     

    Standard Hardness:

    ThicknessHardness
    Upto 0.40mm525 - 600 Hv
    Above 0.40 mm upto 0.80 mm475 - 550 Hv
    Above 0.80mm425 - 500 Hv
    • Non-standard hardness may be supplied against specific enquiry.

    Typical Application and uses:

    • Saws
      Wood cutting Band saws
      Hand saws
      Cross-cut saws
      Pit saws
    • Hand Tools
      Paint Scrappers
      Plastering Trowels
    • Industrial Knives
      Leather
      Plastic
      Textile
      Sugar Cane
    • Automobile Products
      Clutch plates
      Brake components
      Horn diaphragms
    • Spring & Spring Washers
    • Textile and Jute mill accessories
    • Compressor valve plates
    • Forge Hammer Belts

    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C70 Spring Steel

    REQUEST CALLBACK

    C70 Spring Steel
    Approx. Rs 80 / Kilogram(s)
    Get Best Quote

    Simplex Metal & Alloys is a huge exporter of C70 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

    The springs use for counter balancing rolling shutter can be make from spring steel wire or flat spring steel strip. Flat spring steel strips are widely used in rolling shutter industies, due to its durability and 3000 cycles rolling up and down per year. It is usually cut into 3m, 3.5m, 5m, 5.5m, 6m from flat spring big coils. Flat spring steel trip used for garage door spring, the material shall be 0.65-0.75 percent carbon steel strip with hardened and tempered process. Blue tempered in flat spring steel strip, can be anti-corrossion for a long time without getting rust.

    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C75 Spring Steel

    REQUEST CALLBACK

    C75 Spring Steel
    Approx. Rs 80 / Kilogram(s)
    Get Best Quote

    High Carbon Steel Strip combines ease of fabrication with good strength and surface finish, is valued for its strength properties and operates at significantly higher levels than the mild steel grades. High carbon steel strip can be finished to meet the needs of a wide range of products. Where tensile strength and hardness are required, High Carbon steels are the material of choice.

    Grades : C60, C65, C70, C75, C85, HC-14, En 42 J, C-98, C-100, C-124 / HC21 etc.

    Simplex Metal & Alloys is a large exporter of C75 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.


    ronormGermanyUKUSA
    EN 10132-4DIN 17222BS 1449SAE J403%C%Mn%Si%S%P
    C50ECK 50CS50SAE1050.45-.55.50-.90.05-.35.040 max.045 max
    C67SCK67/C67CS70SAE 1070.68 - .73.60 - .85.15 - .25.01 max.02 max
    C75SCK75/C75CS70SAE 1074.70 - .75.60 - .80.15 - .30.025 max.025 max
    C85SCK85CS80SAE 1085.80 - .90.40 - .70.15 - .35.025 max.025 max

    We offer spring steel strip in various shapes and sizes according to your final uses.

    These have excellent hardens property and high yield strength. Clients can avail these at competitive prices.

    Thickness : 0.2 mm - 8.0mm

    Width : 6 mm - 450 mm

    Temper : as rolled hard and fully Spherodized annealed


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C80 Spring Steel

    REQUEST CALLBACK

    C80 Spring Steel
    Approx. Rs 90 / Kilogram(s)
    Get Best Quote

    High carbon steels contain from 0.7 to 1.00% C with manganese ranging from 0.5% to 0.9% This steels are commonly known as spring steel. These steels are generally operated at very high stresses and heat-treated to obtain the maximum elastic limits and fatigue resistance without becoming sufficiently brittle to cause sudden failure in service. Hardenability of spring steel is very important because only fully hardened springs have the maximum resistance to take a permanent set (sagging).

    Simplex Metal & Alloys is a huge exporter of C80 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

    We offer the following grades in spring steel:
    Grade C-80
    Grade C-98

    Grade C-80

     

    Grade C-80
    Chemistry:
    Carbon % -0.75 to .85
    Silicon % -0.10 to 0.35
    Manganese % -0.60 to 0.90
    Sulphur % -0.05 max
    Phosphorus % -0.05 max

     

    Physical Properties:
    Hardness: 220HV max
    Yield Strees: 290N/mm2 min
    Tensile Strength: 640N/mm2 max

    Range:
    Thickness: 0.07 mm to 4.00 mm
    Width: 8 mm to 500 mm (in thickness lower than 0.6 mm, 4 mm wide material can be supplied)
    Hardness: Fully annealed material with a maximum hardness of 200 VPN & special temper material with hardness ranging from 230 VPN to 270 VPN.


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C90 Spring Steel

    REQUEST CALLBACK

    C90 Spring Steel
    Approx. Rs 90 / Kilogram(s)
    Get Best Quote

    High Carbon Steel Strips are steel strips which can successfully undergo heat-treatment and have approximately 0.6–0.99% carbon content. High carbon steel coils are very strong and are used for springs and high-strength wires.

    Simplex Metal & Alloys is a huge exporter of C90 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

    Specifications of High Carbon Steel Strip:
    1.Standards:DIN EN 10132, or according to customer request.
    2.Grade: #40, #45, #50, #60, #70, #75,65Mn,T8, T8A,T10, T10A,50GrVA, 60Si2Mn,SK4,SK5
    3.Thickness: 0.2mm-5.0mm
    4.Width: 10mm-400mm
    5.Length: as customers' request
    6.Color : yellow,blue,white,etc
    Parameter of High Carbon Steel Strips:
    Thickness(mm)

     

    Tolerance( mm)

     

    0.20-0.25

     

    0-0.02

     

    0.25-0.40

     

    0-0.03

     

    0.40-0.70

     

    0-0.04

     

    0.70-1.00

     

    0-0.05

     

    1.00-1.50

     

    0-0.07

     

    1.50-2.50

     

    0-0.09

     

    2.50-5.00

     

    0-0.12

     

    Symbol / Distinctionof RefiningASR
    As AnnealedAs Skin passedAs Rolled
    Hardness(Hv)Tensile Strength(kgf/mm²)Elongation(%)Hardness(Hv)Hardness(Hv)
    SK 2M180 ~ 22060 ~ 7015 Min210 Max210 ~ 300
    SK 3M180 ~ 22060 ~ 7015 Min210 Max210 ~ 300
    SK 4M
    SAE(AISI)1095
    CK90(C90)
    180 ~ 22050 ~ 7020 Min200 max200 ~ 290
    SK 5M
    SAE(AISI)1085
    CK80(C80)
    170 ~ 20050 ~ 7020 Min200 max200 ~ 290
    SK 6M
    SAE(AISI)1075
    CK75(C75)
    160 ~ 19050 ~ 6525 Min195 Max195 ~ 280
    SK 7M
    SAE(AISI)1065
    CK65(C65)
    150 ~ 19050 ~ 6025 Min190 max190 ~ 280

    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C95 Spring Steel

    REQUEST CALLBACK

    C95 Spring Steel
    Approx. Rs 100 / Kilogram(s)
    Get Best Quote

    S95 spring steel stockholders and suppliers, delivering to the whole of the UK. This grade of spring steel has an average carbon content of 0.95%. West Yorkshire Steel are suppliers of CS95 hardened and tempered spring steel strip conforming to BS1449 and BS5770 designations. CS95 strip is supplied in coil and can be cut and slit to your requirements. It is common for CS95 strip to be supplied with a polished surface finish; achieved by fine grinding, abrasive brushing or other similar type of process. With this polished finish CS95 strip is supplied with dressed edges or sheared to your required width. For spring applications it is recommended that CS95 be used in the hardened and tempered condition We also supply CS95 annealed spring steel.

    Simplex Metal & Alloys is a huge exporter of C95 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.

     

    We welcome export enquiries for spring steel. Contact our sales office and consult our shipping policy for further details.

    Related Specifications
    EN44 1.0618 1.1274 1.1217 C92D XC90 AISI 1095 SAE 1095
    BSEN10132-1 BSEN10132-2 BSEN10132-3 BSEN10132-4 DIN17222

    Analysis
    Carbon0.90-1.00%Phosphorous0.04% max
    Manganese0.30-0.60%Sulphur0.04% max
    Silicon0.05-0.35%


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    C100 Spring Steel

    REQUEST CALLBACK

    C100 Spring Steel
    Approx. Rs 100 / Kilogram(s)
    Get Best Quote

    CS100 spring steel stockholders and suppliers, delivering to the whole of the UK. This grade is a carbon spring steel with an average content of 0.95% carbon. West Yorkshire Steel are CS100 hardened and tempered spring steel suppliers and stockholders of strip, conforming to designations BS1449 and BS5770. CS100 strip is supplied in coil and can be cut and slit to your requirements. It is standard for CS100 strip to be supplied with a polished surface finish; this is achieved by a fine grinding, abrasive brushing or other similar process. With this polished finish CS100 strip is supplied with dressed edges or sheared to your required width. For spring applications it is recommended that CS100 is used in the hardened and tempered condition.

    AnalysisCarbon0.95-1.05%Phosphorous0.04% max
    Manganese0.30-0.60%Sulphur0.04% max
    Silicon0.05-0.35%  

    We welcome export enquiries for spring steel. Contact our sales office and consult our shipping policy for further details.

    Applications

    Used widely for a variety of applications including wood cutting saws, masonry tools, clutches, agricultural tools, knives, doctor blades, saw blades, shims, washers and flat springs.

    Heat Treatment

    When hardening CS100 heat treatment temperatures, including rate of heating, soaking and cooling times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of spring steels.

    Welding

    We recommend you contact your welding consumables supplier who should provide you full assistance and information on welding spring steel grade CS100.

    Certification

    Spring steel grade CS100 is available with cast and analysis certification, please request when placing any orders.

    Quality Assured Supply

    CS100 spring steel is supplied in accordance with our ISO 9001 : 2008 registration.

     


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    EN47 Spring Steel

    REQUEST CALLBACK

    EN47 Spring Steel
    Approx. Rs 90 / Kilogram(s)
    Get Best Quote

    EN47 spring steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of EN47 chromium vanadium type spring steel supplied in the as rolled condition. EN47 is suitable for oil hardening and tempering. When used in the oil hardened and tempered condition EN47 spring steel combines spring characteristics with good wear and abrasion resistance. When hardened EN47 offers excellent toughness and shock resistance which make it a suitable alloy spring steel for parts exposed to stress, shock and vibration.

    Temper the EN47 spring steel component immediately after quenching whilst tools are still hand warm. Re-heat to the tempering temperature then soak for one hour per 25 millimetre of total thickness (2 hours minimum) Cool in air. For most applications tempering of this grade will be between 400-600°C.

    Spring steel EN47 is a chrome vanadium grade commonly supplied as rolled and available with cast and analysis certification, please request when placing any orders.

    Simplex Metal & Alloys is a huge exporter of EN47 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    EN42 Spring Steel

    REQUEST CALLBACK

    EN42 Spring Steel
    Approx. Rs 90 / Kilogram(s)
    Get Best Quote

    EN42 spring steel stockholders and suppliers, delivering to the whole of the UK. Available as annealed sheet or hardened and tempered spring steel strip it is supplied to specification conforming to BS970 designation. EN42 strip is supplied in coils and can be cut to your requirements. This is a carbon spring steel grade with an average carbon content of 0.70%. It is common for EN42 steel strip to be supplied with a polished finish; which is achieved by fine grinding, abrasive brushing or other similar processes. With this polished finish the strip is available with dressed edges or sheared edges slit to your required width. For spring applications it is recommended that the steel is used in the hardened and tempered condition. EN42 annealed is available in sheet, plate and strip.

    EN42 is suitable for a wide variety of spring applications including flat springs, clutches, knives, doctor blades, saw blades, agricultural tools, wood cutting saws, shims, knives, blades, shims, washers, masonry tools.

    When heat treating EN42 temperatures, including rate of heating, cooling and soaking times etc. will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult your heat treatment provider for full guidance on heat treatment of spring steels.

    EN42 spring steel is supplied in accordance with our ISO 9001 : 2008 registration.

    Simplex Metal & Alloys is an exporter of EN42 Spring Steel in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    Spring Steel Sheets

    REQUEST CALLBACK

    Spring Steel Sheets
    Approx. Rs 100 / Kilogram(s)
    Get Best Quote

    Spring steel stockholders and suppliers, delivering to the whole of the India.

    Simplex Metal & Alloys
    are suppliers of spring steel round bar, flat bar, plate and sheet, we also offer spring steel strip. Bar can be cut to your required lengths. Spring steel plate and sheet can be flame cut or guillotine cut to your requirements. Spring steel strip is available in coil, slit and cut to length. Spring steel, as its name suggests, is most commonly used in the manufacture of springs. When hardened and tempered (as supplied, or heat treated by the customer) it offer excellent spring characteristics.
    We welcome export enquiries for spring steel. Please contact our sales office and consult our shipping policy for details. If you do no find the spring steel specification you require on our web site please contact our sales team who may be able to assist you with your enquiry.

    Carbon spring steel strip, plate and sheet is supplied in the hardened and tempered and annealed condition. Stainless spring steel is available as strip. Spring steel strip is commonly supplied in coil cut to your requirements.

    Bar is available in carbon, chrome vanadium and silicon manganese spring steel types. Supplied in full bar lengths or cut as one offs or multiple cut pieces.

    Medium carbon spring steel grades can be flame cut to your requirements. Profiles are commonly normalised or stress relieved to alleviate any hard edges which may have occured during flame cutting.


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

    Spring Steel Wire

    REQUEST CALLBACK

    Spring Steel Wire
    Approx. Rs 100 / Kilogram(s)
    Get Best Quote

    Carbon spring steel wire is a top quality product which is suitable for making springs for various applications. Our product suite features spring steel wires in phosphatized and reddish/dry-bright finish in various ring formats. The 3 different grades of spring steel wire that are manufactured by us are: Grade I: Should be used for springs and wire form subjected to static load or low load cycles low stressed. Grade II: Should be used for springs and wire form subjected to moderate load cycles - moderately stressed. Grade III: Should be used for highly stressed springs, for springs under moderate to high dynamic stresses and in smaller diameters even for impact loaded springs.

     

    Application:

     

    • It finds application in varied types of industries ranging from automotive to mattress springs, and for various end uses like spring, spring washer, chain bush, tiller spring, etc.

     

    Standards:

     

    • IS: 4454 (Part I)
    • Size Range: 1.40 mm - 8.0 mm

    Simplex Metal & Alloys is a huge exporter of Spring Steel Wire in countries like Kuwait, Bahrain, Iraq, Oman, Qatar, Saudi Arabia and the United Arab Emirates (UAE), US, Singapore, Malaysia, Dubai, etc.


    Additional Information:

  • Minimum Order Quantity: 1 Kilogram(s)
  • Yes! I am Interested

     
    X


    Call Us: +91-8079453669
    Simplex Metal & Alloys
    Aakash Shah (Sales Head)
    29, 1st Floor, Building No. 247 SVP Road, Alankar Cinema Building,
    Mumbai - 400004, Maharashtra, India
    Contact via E-mail
    Contact via SMS



    Home  |   Profile   |  Products  |  Site Map  |   Contact Us   |   Mobile Site

    © Simplex Metal & Alloys. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Simplex Metal & Alloys