Product Details:
Surface Finish | Brushed, Sand Blasted, Finished Polished, Mill Finished, Anodized |
Brand | Jindal/ISMT/MSL |
Color | Black |
Size | >3 inch |
Thickness | Available in all Sizes |
Unit Length | 12m, 30m, 6m, 3m |
ASTM A53 is a carbon steel alloy, used as structural steel or for low-pressure plumbing. The alloy specifications are set by ASTM International, in specification ASTM A53/A53M.
A53 pipe comes in three types and two grades, A53 Type F, which is longitudinally furnace butt welded or continuous welded (Grade A only), A53 Type E, which is longitudinally electric resistance welded (Grades A and B), and A53 Type S, which is seamless pipe, produced by hot working, and possibly cold finishing, the steel (Grades A and B). ASTM A53 pipe is sized according to the nominal pipe size (NPS) system. It is commonly available with national pipe thread ends or with plain cut ends. It can be used for steam, water, and air conveyance. It is also weldable and can be used in structural applications, although ASTM A500 tube, which is available in the same NPS sizes, is sometime preferred.
This is a standard set by the standards organization ASTM International, a voluntary standards development organizations that sets technical standards for materials, products, systems, and services.
A53 PIPE SPECIFICATIONSA/SA53NPS 1/4 Inch to 30 Inch Schedules 10 through 160, STD, XH and XXHScope
ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.
Materials and Manufacture
The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.
ASTM A53 Standard- 06A - HYSP
1. Scope of ASTM A53 Standard ASTM A53 is standard specification for pipe, steel, black and hot dipped, zinc-coated, welded and seamless. This specification2 covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650] (Note 1), inclusive, with nominal wall thickness (Note 2) as given in Table X2.2 and Table X2.3. It shall be permissible to furnish pipe having other dimensions provided that such pipe complies with all other requirements of this specification.Supplementary requirements of an optional nature are provided and shall apply only when specified by the purchaser.
2. Application of ASTM A53 Standard Pipes Steel Pipes ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging.
3. Types and Grades This specification covers the following types and grades:
3.1 Type F—Furnace-butt-welded, continuous welded Grade A.
3.2 Type E—Electric-resistance-welded, Grades A and B,
3.3 Type S—Seamless, Grades A and B.
Note:
Type F is not intended for flanging.
If Type S or Type E is required for close coiling or cold bending, Grade A is the preferred grade; however, this is not intended to prohibit the cold bending of Grade B pipe.
Type E is furnished either nonexpanded or cold expanded at the option of the manufacturer.
4. Materials and Manufacture of ASTM A53 Pipes
4.1 The steel for both seamless and welded pipe shall bemade by one or more of the following processes: open-hearth, electric-furnace, or basic-oxygen.
Product Details:
Unit Length | 6 m, 24m, 18 m, 12 m |
Material Grade | SS304L, SS316L, SS316, SS304, ASTM A240 |
Surface Finish | Brushed, Anodized, Finished Polished, Mill Finished |
Shape | Rectangular, Oval, Square, Round |
Size | 1 inch, >4, 3 inch, 4 inch, 2 inch |
Product Details:
Condition | New |
Size | 3 inch, 2 inch, 1 inch, 3/4 inch, 1/2 inch |
Unit Pipe Length | 6 meter, Customized, 3 meter |
Unit Length | 12m, 3m, 6m |
Shape | Square |
Additional Information:
Product Details:
Thickness | 2-5mm |
Surface treatment | Polished |
Material | Carbon steel |
Size | 1 inch, 3/4 inch |
Product Details:
Material | Carbon Steel |
Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch, 3 inch |
Unit Pipe Length | Customized, 6 meter, 9 meter, 3 meter, 18 meter |
Brand | Simplex Metal |
Product Details:
Size | 1/2 inch, 1 inch, 3/4 inch, 3 inch, 2 inch |
Unit Pipe Length | 18 meter, 3 meter, Customized, 6 meter, 9 meter |
Material | Stainless Steel |
Features | Polished, Cold Drawn, Pickled, Anealed |
We are the leading supplier of Heavy Duty Steel Pipes made available to our clients at competitive prices.
Product Details:
Shape | Cylindrical |
Material | Mild steel |
Size | 3/4 inch |
Unit Pipe Length | 3 meter, 6 meter |
Product Details:
Material | Steel |
Shape | Cylindrical |
Size | 3/4 inch, 3 inch |
Unit Pipe Length | 9 meter, 18 meter, 6 meter |
Product Details:
Material | Stainless Steel |
Grade | 316 |
Size | 1 inch, 3 inch, 1/2 inch, 3/4 inch, 2 inch |
Unit Pipe Length | 3 meter, Customized, 6 meter, 18 meter |
We are the leading supplier of SSAW Steel Pipe made available to our clients at competitive prices.
Item Code: 07
We Simplex are one of the leading manufacturers, suppliers and exporters of ASTM A53 Pipes. Chemical Composition of ASTM A53 Pipes
Mechanical Properties of ASTM A53 Pipes
|
Product Details:
Minimum Order Quantity | 500 Kilogram |
Color | Silver |
Shape | Circular |
Size | 3/4 inch |
Grade X65 indicates 65000 PSI minimum yield strength and 77000 PSI minimum ultimate tensile strength.
API Standard Specification for Line PipeThe American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, standardizing pipeline transportation systems within the materials, equipment and offshore structures for natural gas, petroleum, and petrochemical industries. When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade
API-5L-Grade B PSL-1/PSL-2 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
1. Size: OD: 1/2" to 24"
W. T: 3mm-40mm ( SCH 20 to SCH 180)
2. Material&Standard: ASTM A 106/A53 Gr B APL 5L Gr B API 5L X42-X 70 DIN 2448
3. Surface: Oil-coating, varnish, or end-protection by plastic caps to be confirmed
4. Packing: In hexagonal shape bundles wrapped with strong steel trip 2MT/bundle.
5. Application: Oil&gas, chemical, electric industial and ship contruction, water transportation
6. Operation principle: Superior Quality, Competitive Price, Best Service.
API STANDARD SPCIFICATION | |||||||
---|---|---|---|---|---|---|---|
LINE PIPE PSL1&PSL2 FOR PETROLEUM AND NATURAL GAS INDUSTRY (API 5L) | |||||||
Standard: API 5L (44th edition) PSL1&PSL2 | |||||||
Steel grades: GRADE B | |||||||
Delivery condition: R, N | |||||||
Size range: OD NPS 2 1/2 TO NPS 24, WT 6MM TO 35 MM, According to ASME/ANSI B36.10M | |||||||
Tolerance: according to API 5L | |||||||
Length: customized according to requirements | |||||||
Certificate: EN 10204/3.1 | |||||||
GENERAL INFORMATION | |||||||
Pipes used in transportation of oil, gas, water and other liquid. | |||||||
CHEMICAL SOMPOSITION (CAST ANALYSIS) IN% | |||||||
PSL | Steel grade | Delivery condition | C max | Si max | Mn max | P max | S max |
PSL1 | B(L245) | R,N | 0.28 | -- | 1.20 | 0.030 | 0.030 |
PSL2 | BR(L245R) BN(L245N) | R,N | 0.24 | 0.40 | 1.20 | 0.025 | 0.015 |
Note: R: As-rolled; N: normalizing rolled, normalizing formed | |||||||
MECHANICAL PROPERTIES | |||||||
PSL | Steel grade | Yield strength Min(Mpa) | Tensile strength Min(Mpa) | Elongation A Min(%) | Impact energy J | ||
Test temperature | |||||||
0°C | |||||||
PSL1 | B(L245) | 245 | 415 | AS PER API 5L | -- | ||
PLS2 | BR(L245R) BN(L290N) | 245-450 | 415-760 | AS PER API 5L | AS PER API 5L |
Additional Information:
|
Click to Zoom |
Item Code: 059
SA106 Grade C, P265GH EN10216-2
ASME SA179, SA192, SA210 Grade A1, SA210 Grade C, BS3059 Grade 320, 360, 440
ASME SA-179, SA-192, SA210-A1, SA210-C, SA213, BS-3059 Gr.320, Gr.360, Gr.440
IS:4923 Grade YSt 210, YSt 240, YSt 310 SHS / RHS - Square / Rectangular Hollow Section
IS-4923 Grade YST210, YST240, YST310 SHS / RHS - Square / Rectangular Hollow Section
Additional Information:
Product Details:
Color | Black |
Size | 1/2 inch, 3/4 inch, 1 inch |
Unit Pipe Length | Customized |
API5L steel pipe
Specifications Ranges:
OD: 1/2"-48" (21.3mm-1219mm)
WT: SCH10-SCHXXS (0.5mm-40mm)
Material Standard:
PSL 1: A25, A, B, X42, X46, X52, X56, X60, X65, X70
PSL 2: B, X42, X46, X52, X56, X60, X65, X70, X80
Applications:
For the purpose of transportation of gas,water,oill in oil&gas industry.
Additional Information:
Carbon steel Seamless IBR PipesProviding you the best range of Carbon steel Seamless IBR Pipes such as Carbon Steel ASTM A106 GR A Seamless IBR Pipes, Carbon Steel ASTM A106 GR B Seamless IBR Pipes, Carbon Steel ASTM A106 GR C Seamless IBR Pipes, Carbon Steel ASTM A53 GrR.A Seamless IBR Pipes, Carbon Steel ASTM A53 GR.B Seamless IBR Pipes, Carbon Steel ASTM A333 GR 1 Seamless IBR Pipes and many more items with effective & timely delivery. Seamless and Welded API PSL1 Pipes The Seamless and Welded API PSL1 Pipes are particularly manufactured to be exported in countries such as Bahrain, UAE, Saudi Arabia, Oman, Kuwait, Lebanon, Egypt, Turkey and Qatar, Korea, Singapore, Malaysia, Indonesia, Vietnam, Thailand, Australia, America, European countries like UK, Italy, Netherlands, Croatia, Austria, France, Holland, Polland, Germany. Available Grades: API 5L L175 PSL1 or API 5L PSL1 A25 API 5L L175P PSL1 or API 5L PSL1 A25P API 5L L210 PSL1 or API 5L PSL1 A API 5L L245 PSL1 or API 5L PSL1 B API 5L L290 PSL1 or API 5L PSL1 X42 API 5L L320 PSL1 or API 5L PSL1 X46 API 5L L360 PSL1 or API 5L PSL1 X52 API 5L L390 PSL1 or API 5L PSL1 X56 API 5L L415 PSL1 or API 5L PSL1 X60 API 5L L450 PSL1 or API 5L PSL1 X65 API 5L L480 PSL1 or API 5L PSL1 X70 Seamless and Welded API PSL2 Pipes We are the professional manufacturer, supplier, stockist, wholesaler of API PSL 2 Pipe and other industrial materials. Keeping a large stock in India, we also export the range in countries like Bahrain, UAE, Saudi Arabia, Oman, Kuwait, Lebanon, Egypt, Turkey and Qatar, Korea, Singapore, Malaysia, Indonesia, Vietnam, Thailand, Australia, America, European countries like UK, Italy, Netherlands, Croatia, Austria, France, Holland, Polland, Germany. Available Grades: API 5L L245R PSL2 or API5L PSL2 BR API 5L L290R PSL2 or API5L PSL2 X42R API 5L L245N PSL2 or API5L PSL2 BN API 5L L290N PSL2 or API5L PSL2 X42N API 5L L320N PSL2 or API5L PSL2 X46N API 5L L360N PSL2 or API5L PSL2 X52N API 5L L390N PSL2 or API5L PSL2 X56N API 5L L415N PSL2 or API5L PSL2 X60N API 5L L245Q PSL2 or API5L PSL2 BQ API 5L L290Q PSL2 or API5L PSL2 X42Q API 5L L245Q PSL2 or API5L PSL2 BQ API 5L L290Q PSL2 or API5L PSL2 X42Q API 5L L320Q PSL2 or API5L PSL2 X46Q API 5L L360Q PSL2 or API5L PSL2 X52Q API 5L L390Q PSL2 or API5L PSL2 X56Q API 5L L415Q PSL2 or API5L PSL2 X60Q API 5L L450Q PSL2 or API5L PSL2 X65Q API 5L L485Q PSL2 or API5L PSL2 X70Q API 5L L555Q PSL2 or API5L PSL2 X80Q API 5L L245M PSL2 or API5L PSL2 BM API 5L L290M PSL2 or API5L PSL2 X42M API 5L L320M PSL2 or API5L PSL2 X46M API 5L L360M PSL2 or API5L PSL2 X52M API 5L L390M PSL2 or API5L PSL2 X56M API 5L L415M PSL2 or API5L PSL2 X60M API 5L L450M PSL2 or API5L PSL2 X65M API 5L L485M PSL2 or API5L PSL2 X70M API 5L L555M PSL2 or API5L PSL2 X80M API 5L L625M PSL2 or API5L PSL2 X90M API 5L L690M PSL2 or API5L PSL2 X100M API 5L L830M PSL2 or API5L PSL2 X120M Pipes (IBR) |
CARBON STEEL SEAMLESS PIPES SPEC :- |
ASTM A106 / A53 / API 5L Gr. B, A333 GR. 6 |
ALLOY STEEL SEAMLESS PIPES SPEC :- |
ASTM A335 P11, A335 P22 |
ERW PIPES SPEC :- |
IS:1239 PT-1, IS:3589 FE330, IS:3589 FE410, API 5L GR. B |
Additional Information:
Simplex Metal & Alloys is a large stock holders of API5L Pipes of X52, X56, X60, X65 & X70.
We stock a full range of API 5L X52 PSL-1 & PSL-2 line pipe in seamless.
Sizes
Nominal Pipe Size 2" to 24" O.D.
Wall Thickness - Schedule 10 through 160, STD, XS, XXS.
Standard API 5L
Product Specification Level PSL-2
Steel grade X52
Chemical Properties %
PSL | C, a | Mn a | P | S | Si | V | Nb | Ti | Other | CEIIW | CEpcm |
1 | 0.24 | 1.40 | 0.025 | 0.015 | 0.45 | 0.10 | 0.05 | 0.04 | b,c | .043 | 0.025 |
2 | 0.28 | 1.40 | 0.03 | 0.03 | - | b | b | b | - | - | - |
Mechanical Properties
API 5L PSL-1 X52 API 5L PSL-2 X52
Tensile strength, min /max, psi (MPa) 66,700(460)/ n/a 66,700 / 110,200
Yield strength, min /max, psi (MPa) 52,000 (300)/n/a 52,000 / 76,900
Additional Information:
Product Details:
Color | Silver |
Shape | Round |
Size | 1/2 inch, 3/4 inch, 1 inch |
API-5L-X52 PSL-1/PSL-2 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
Specifications1. API 5L X46 PSL1/2 Pipes steel pipe 2. Manufacturer supply 3. high quality control 4. API/GB/EN
Product name | API 5L Double-side spiral welded steel pipe / API 5L X52 PSL1/2 Pipes |
---|---|
Out Diameter | 219mm-3048mm, 8"-120" |
Wall Thickness | 5.5mm-25.5mm, |
Length | 3m-18m |
Material/Steel grade | A, B, X42, X46, X52, X56, X60, X65, X70,L210, L245, L290, L320, L360, L390, L415, L450, L485 BN, X42N, X46N, X52N, X56N, X60N,BM, X42M, X46M, X52M, X56M, X60M, X65M, X70M X80M, X90M, X100M, L245R, L290R, L245N, L290N, L320N, L360N, L390N, L415N L245M, L290M, L320M, L360M,L390M, L415M, L450M, L485M, L555M, L625M, L690M, Grade 1, Grade 2, Grade 3, St33, St37, St42, St34-2, St37-2, St42-2, St52-3, P195, P235, P265,S355NH, , Q195, Q215, Q235, Q345, etc. |
Certificate | EN10217, API 5L PSL1/ PSL2, PED97/23/EC , AD2000-WO,GB/T9711.1/2,etc. |
End | beveled, |
surface | Bare, varnished, black lacquer, 3PE,FBE, Epoxy, as per customer’s requirement. |
Test | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength Elongation), Metallographic Test, Technical Properties (Bending Test,Charpy-v Impact Test, Hydrostatic Test, X-ray Test, Ultrasonic Test) |
Packing | Usually in loose pieces; can be packed as customers’ special requirements |
Application | - line pipe for use in pipeline transportation systems in the petroleum and natural gas industries; - applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in-place concrete piles; - predominantly used in the construction of chemical plant, vessels, pipe work and for general mechanical engineering purposes; - applies to structural hollow sections and pressure purposes etc. |
1. API 5L X52 PSL1/2 steel pipe
2. Standard: API 5L/GB/SY/ECO/DIN/ASTM
3. OD: 219-3048mm
4. WT:5.5-25.5mm
API-5L Grade-B, X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL1 PSL2 Line Pipe
API 5L X65 PSL2 Line Pipes - Available ex-stock
API 5L X65 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X65 PSL2 Sour Service Line Pipes - Available ex-stock
API 5L X65 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X65 PSL2 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X70 PSL1 Line Pipes - Available ex-stock
API 5L X70 PSL2 Line Pipes - Available ex-stock
API 5L X70 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X70 PSL2 Sour Service Line Pipes - Available ex-stock
Additional Information:
Product Details:
Minimum Order Quantity | 1000 Kilogram |
Color | Black |
Size | 1/2 inch, 3/4 inch, 1 inch |
Unit Pipe Length | Customized |
Simplex Metal & Alloys stock huge quantity of API5L Pipes of X52, X56, X60, X65 & X70.
Chemical Composition of API 5L Grade X56 PSL2 | |||||
Grade | The Element (%) | ||||
C | Mn | P | S | Ti | |
API 5L X56 PSL2 | ≤0.22 | ≤1.40 | ≤0.025 | ≤0.015 | ≤0.04 |
Mechanical Properties of API 5L Grade X56 PSL2 | |||||
Grade | Yield Strength | Tensile Strength | Elongation | Charpy V Notch Impact Test | |
Degree | Min Value | ||||
API 5L X56 PSL2 | Mpa | Min Mpa | Min % | - | J |
386-544 | 490-758 | - | - |
Product Details:
Color | Black and White |
Material | Stainless Steel |
Size | 3/4 inch, 1 inch, 1/2 inch |
Product Details:
Color | Grey |
Size | 1/2 inch, 3/4 inch, 1 inch, 2 inch |
Unit Pipe Length | Customized |
API 5L Grade B PSL1 Line Pipes - Available ex-stock
API 5L Grade B PSL2 Line Pipes - Available ex-stock
API 5L Grade B PSL1 Sour Service Line Pipes - Available ex-stock
API 5L Grade B PSL2 Sour Service Line Pipes - Available ex-stock
API 5L Grade B PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L Grade B PSL2 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X42 PSL1 Line Pipes - Available ex-stock
API 5L X42 PSL2 Line Pipes - Available ex-stock
API 5L X42 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X42 PSL2 Sour Service Line Pipes - Available ex-stock
API 5L X42 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X42 PSL2 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X46 PSL1 Line Pipes - Available ex-stock
We mainly stock the Pipes of following make :
Sumitomo Metal - Japan
Nippon Steel - Japan
JFE Steel - Japan
Kawasaki Steel - Japan
Vallourec & Mannesmann - France
Vallourec & Mannesmann - Germany
Vallourec & Mannesmann - Brazil
Salzgitter Mannesmann - Germany
Arcelor Mittal Steel - Romania
Arcelor Mittal Steel - Czech Republic
Tenaris Dalmine - Spain
Tenaris Silcotub - Romania
Tenaris Siderca - Argentina
Tenaris Tamsa - Mexico
Tenaris NKK - Japan
Volzhski - Russia
Nizhnedneprovsky - Ukraine
USS - USA
Welspun - India
Jindal Saw - India
Indian Seamless - India
Maharashtra Seamless - India
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156, NACE MR-01-03 / NACE MR-01-75 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-W0, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3
API 5L X70 PSL1/2 Pipes, best quality API 5L X70 PSL1/2 Pipes, wide variety of API 5L X70 PSL1/2 Pipes, API 5L X70 PSL1/2 PipesIndia, API 5L X70 PSL1/2 Pipesdistributor Mumbai, API 5L X70 PSL1/2 Pipestraders, prime quality API 5L X70 PSL1/2 Pipes, Source for API 5L X70 PSL1/2 Pipes, specialize in API 5L X70 PSL1/2 Pipes, API 5L X70 PSL1/2 Pipeswith Test Certificate
Additional Information:
Product Details:
Unit Pipe Length | 3 meter, 6 meter, Customized, 18 meter, 9 meter |
Steel Grade | All Sizes |
Size | 1 inch, 2 inch, 3/4 inch, 1/2 inch, 3 inch |
Carbon Steel: ASTM A106 Gr. B, ASTM A53 Gr B, API5L X42/46/52/56/60/65/70/75/80 – PSL 1 & PSL 2, Etc.- IBR & NIBR. (3LPE, FBE, Epoxy Coating also provided).
Additional Information:
We can help supply all of the api5l psl x42 pipe x46 pipe x52 pipe x60 pipe x65 pipe x70 pipe or linepipe supplies that your company needs for use in the oil or natural gas industries. API 5L Line Pipe Specifications for these pipes regulate usage for standard Grade A and Grade B pipes, with Grade X indicating stronger variants for drilling, production and transport requirements for offshore, arctic, deep well or harsher environments.
All products are industry-standard conforming to or exceeding API, ASTM, ASME, ANSI and other national and international standards.
API X Grades – some of the sturdiest pipes and tubing available designed for extreme environments or exceedingly high pressure environments
We have a large scale unit engaged in stocking and exporting carbon steel tubes, carbon steel pipes and carbon steel welded pipes, carbon steel welded tubes and electro galvanized steel tubes/pipes. we supply for engineering purpose, ERW pipes for water, gas & sewerage, carbon steel tubes for idlers of belt conveyors, water wells and lancing pipes for various automotive & industrial applications
Applications
Carbon Steel is used in the most critical engineering applications and also in certain applications in the automotive sector. In addition, some of the value-added Carbon Steel products include steel for LPG cylinders, API grade, corrosion resistant steel, critical structural application steel, boiler quality, auto grades, precision tubes and medium/high carbon grades, among others.
Size (Seamless): 1/2” NB - 28” NB
Size (ERW): 1/2” NB - 60” NB
Size (SAW, LSAW, HSAW, EFW): 16” NB - 100” NB
Wall Thickness available: Schedule 20 - Schedule XXS (heavier on request) up to 250 mm thk.
Grade X52 indicates 52000 PSI minimum yield strength and 66000 PSI minimum ultimate tensile strength.
API Standard Specification for Line PipeThe American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, standardizing pipeline transportation systems within the materials, equipment and offshore structures for natural gas, petroleum, and petrochemical industries. When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
Product Details:
Unit Pipe Length | Customized, 18 meter, 9 meter, 6 meter, 3 meter |
Size | 2 inch, 1 inch, 3/4 inch, 1/2 inch, 3 inch |
we are serving with optimum quality Spiral Welded Pipes. Our welded pipe is valued in the market due to its easy installation. This welded pipe is manufactured by vendor’s professionals utilizing excellent quality material and advanced techniques keeping in mind the set norms of industry. In addition, we offer customization on this welded pipe as per the precise requirements of clients within a stipulated time frame.
Features:
Specifications:
Product Details:
Material | Stainless Steel |
Unit Pipe Length | 3 meter, 18 meter, Customized |
Size | 2 inch, 1 inch, 3/4 inch, 1/2 inch, 3 inch |
Steel Grade | 304L,304 H, 316, 316L, 316H,304, |
We are engaged in manufacturing and supplying a wide range of the finest quality of Precision Steel Tubes. In compliance with the industry set norms, the offered tubes can be customized. Quality of the offered tubes is our utmost priority and it is maintained as per the industry set norms at our end.
Features:
Tube Specifications / Standards:
Diameter (OD):
Wall Thickness:
Steel Grades & Alloys:
1008, 1010, 1020, 1026, 4130, ST 37-2, ST 52.3, STKM 11a, STKM 12b, STKM 13c, Many More Grades Available as Requested.Product Details:
Material | Stainless Steel |
Size | 1/2 inch, 3/4 inch, 1 inch, 3 inch, 2 inch |
Unit Pipe Length | Customized, 3 meter, 6 meter, 9 meter, 18 meter |
Steel Grade | Upto T91/P91 |
Click to Zoom |
ASME/ASTMStandard specification black nominal seamless steel pipe (ASME SA53/ASTM A53)
Standard: ASME SA53/ASTM A53 Steel grades: GRADE A, GRADE B
Delivery condition: Hot-finished
Size range: OD NPS 2 1/2 TO NPS 24, WT 6MM TO 35MM, ACCORDING TO ASME/ANSI B36.10M
Tolerance: according to ASME SA53/ASTM A53
Length: customized according to requirements
Certificate: EN 10204/3.1
GENERAL INFORMATION: Pipes are intended for mechanical and pressure applications, as well as ordinary uses in steam,water, gas and airlines.
Additional Information:
Additional Information:
Size Range:
Additional Information:
API-5L-X56 PSL-1/PSL-2 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
Specifications1. API 5L X56 PSL1/2 Pipes steel pipe 2. Manufactory supply 3. high qualtity control 4. API/GB/EN
Product name | API 5L Double-side spiral welded steel pipe / API 5L X56 PSL1/2 |
---|---|
Out Diameter | 219mm-3048mm, 8"-120" |
Wall Thickness | 5.5mm-25.5mm, |
Length | 3m-18m |
Material/Steel grade | A, B, X42, X46, X52, X56, X60, X65, X70,L210, L245, L290, L320, L360, L390, L415, L450, L485 BN, X42N, X46N, X52N, X56N, X60N,BM, X42M, X46M, X52M, X56M, X60M, X65M, X70M X80M, X90M, X100M, L245R, L290R, L245N, L290N, L320N, L360N, L390N, L415N L245M, L290M, L320M, L360M,L390M, L415M, L450M, L485M, L555M, L625M, L690M, Grade 1, Grade 2, Grade 3, St33, St37, St42, St34-2, St37-2, St42-2, St52-3, P195, P235, P265,S355NH, , Q195, Q215, Q235, Q345, etc. |
Certificate | EN10217, API 5L PSL1/ PSL2, PED97/23/EC , AD2000-WO,GB/T9711.1/2,etc. |
End | beveled, |
surface | Bare, varnished, black lacquer, 3PE,FBE,Epoxy, as per customer's requirement. |
Test | Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Metallographic Test, Technical Properties (Bending Test,Charpy-v Impact Test, Hydrostatic Test, X-ray Test, Ultrasonic Test) |
Packing | Usually in loose pieces; can be packed as customers’ special requirements |
Application | - line pipe for use in pipeline transportation systems in the petroleum and natural gas industries; - applies to pipe piles in which the steel cylinder acts as a permanent load-carrying member, or as a shell to form cast-in-place concrete piles; - predominantly used in the construction of chemical plant, vessels, pipe work and for general mechanical engineering purposes; - applies to structural hollow sections and pressure purposes etc. |
1. API 5L X56 PSL1/2 steel pipe
2. Standard: API 5L/GB/SY/ECO/DIN/ASTM
3. OD: 219-3048mm
4. WT:5.5-25.5mm
API-5L Grade-B, X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL1 PSL2 Line PipeWe mainly stock the Pipes of following make :
Sumitomo Metal - Japan
Nippon Steel - Japan
JFE Steel - Japan
Kawasaki Steel - Japan
Vallourec & Mannesmann - France
Vallourec & Mannesmann - Germany
Vallourec & Mannesmann - Brazil
Salzgitter Mannesmann - Germany
Arcelor Mittal Steel - Romania
Arcelor Mittal Steel - Czech Republic
Tenaris Dalmine - Spain
Tenaris Silcotub - Romania
Tenaris Siderca - Argentina
Tenaris Tamsa - Mexico
Tenaris NKK - Japan
Volzhski - Russia
Nizhnedneprovsky - Ukraine
USS - USA
Welspun - India
Jindal Saw - India
Indian Seamless - India
Maharashtra Seamless - India
Inspection & Approval Certificates : EN10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0175 / ISO 15156
Additional Information:
Ø Boiler Tube: Grade BS 3059, GR. 360 / 440, SA / ASTM A210 GR.A 1 (With IBR Test Certificate).
Ø Heat Exchanger Tube: Grade 178 / SA 178, A 179 / SA179, A192 / SA 192, A209 / SA 209, A210 / SA 210, 213 / SA 213.
Ø Air Pre-heater Tubes: BS 6323 Part V.ERW II,SA 178 Grade 1 (Make: Tube Investment).
Ø Corten Steel ERW Tubes: ASTM A423 Grade A (Make: Tube Investment).
Additional Information:
We can help supply all of the API 5L X70 PSL 2 Pipe or linepipe supplies that your company needs for use in the oil or natural gas industries. API 5L Line Pipe Specifications for these pipes regulate usage for standard Grade A and Grade B pipes, with Grade X indicating stronger variants for drilling, production and transport requirements for offshore, arctic, deep well or harsher environments.
API 5L X70Grade X70 means 70000 PSI minimum yield strength and 82000 PSI minimum ultimate tensile strength.
API Standard Specification for Line PipeThe American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, standardizing pipeline transportation systems within the materials, equipment and offshore structures for natural gas, petroleum, and petrochemical industries. When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
API 5L X52 Industry Specifications | Chemical Composition | Yield Strength min. (KSI) | Tensile Strength min. (KSI) | Yield to Tensile Ratio (max) | Elongation % |
ASTM A105, A106, A234, A333, A350, A420, A694,A860 | C 0.17 Si 0.45 Mn 1.75 P 0.020 S 0.010 V 0.10 Nb 0.05 Ti 0.06 | 70 | 82 | 0.93 | 17 |
API 5L Pipe
| You might be intrested in:
|
Additional Information:
We can help supply all of the API 5L X65 PSL 2 Pipe or linepipe supplies that your company needs for use in the oil or natural gas industries. API 5L Line Pipe Specifications for these pipes regulate usage for standard Grade A and Grade B pipes, with Grade X indicating stronger variants for drilling, production and transport requirements for offshore, arctic, deep well or harsher environments.
API 5L X56Grade X56 indicates 56000 PSI minimum yield strength and 71000 PSI minimum ultimate tensile strength.
API Standard Specification for Line PipeThe American Petroleum Institute specification API 5L addresses seamless and welded steel line pipe for pipeline transportation systems in the petroleum and natural gas industries. API 5L is suitable for conveying gas, water, and oil.
Specifications for API 5L adhere to the International Organization for Standardization ISO 3183, standardizing pipeline transportation systems within the materials, equipment and offshore structures for natural gas, petroleum, and petrochemical industries. When authoring the standards, the technical committee recognized that there are two basic Product Specifications Levels (PSL) of technical requirements and therefore developed PSL 1 and PSL 2. PSL 1 is a standard quality for line pipe where PSL 2 contains additional chemical, mechanical properties, and testing requirements.
Grades covered by this specification are A25, A, B and "X" Grades X42, X46, X52, X56, X60, X65, X70, and X80. The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.
API 5L X52 Industry Specifications | Chemical Composition | Yield Strength min. (KSI) | Tensile Strength min. (KSI) | Yield to Tensile Ratio (max) | Elongation % |
ASTM A105, A106, A234, A333, A350, A420, A694,A860 | C 0.16 Si 0.45 Mn 1.65 P 0.020 S 0.010 V 0.07 Nb 0.05 Ti 0.04 | 56 | 71 | 0.93 | 19 |
API 5L Pipe
| You might be intrested in:
|
Additional Information:
Product Details:
Size | 1/2 inch, 1 inch, 3 inch, 3/4 inch, 2 inch |
Unit Pipe Length | 6 meter, Customized, 3 meter, 18 meter, 9 meter |
Features | Polished, Pickled, Anealed, Cold Drawn |
EFSW seamless pipes (ASTM B705 (UNS 8825) are carbon pipes that find application in various industrial applications. Further, these can also be made available in customized specifications as demanded by our customers.
Some of the standard features of these ASTM B705 (UNS 8825) EFSW are:
Dia: - 14"-80"
Wall thickness: 6 to 25.4 mm
Length: Single random